Do I need a thermostatic mixing valve?

 First, we should know the definition of the thermostatic mixing valve (TMV): A thermostatic mixing valve is a kind of valve that provides continuous, constant temperature mixing water by automatically controlling the ratio of the hot and cold water inlet.


image.png


Second, the thermostatic mixing valve is an important part of the water heater. The product is widely used in electric water heater mixing valve, solar water heater and geothermal heating water system. Users can adjust the mixing temperature of hot and cold water according to their needs, the required temperature can be quickly reached and stabilized, to ensure that the water temperature is constant, and is not affected by changes in water temperature, flow, water pressure, to solve the problem of hot and cold water temperature in the bathing centre, when the cold water is interrupted, the mixing valve can automatically turn off the hot water within a few seconds, playing a safety protection role.


Finally, when the cold water supply is suddenly interrupted and the hot water temperature is higher than the set temperature, the SMLG mixing valve can quickly shut off the hot water supply, thus avoiding hot water scalding and the response time is much higher than similar products (foreign mixing valves and imitation products take a few seconds for the hot water to stop), making it truly foolproof and safe.


The above briefly explains the need of thermostatic mixing valve, not only in the use of resource-saving aspects, but also to be able to put forward some requirements on safety issues.


评论

发表评论

此博客中的热门博文

What is the difference between central air conditioning and floor heating?

图片
  Many friends have installed floor heating or air conditioning in their homes As we all know, floor heating, air conditioning, radiator What is the difference between these heating Is it necessary to install the heating system after installing the air conditioner Let's go over it with Smlg Air conditioner The advantage of air conditioning is refrigeration There are great disadvantages in heating Not warm : when the temperature is lower than 10 degrees, it is difficult to ensure that the temperature of the human activity area reaches 10-20 degrees. With the air conditioner on, you should wear a cotton-padded jacket and bake the stove. Unhealthy : the hot air is naturally living and walking, and the air outlet of the air conditioner is high. The heat accumulates in the upper part of the room, and the human body is hot and cold. Uncomfortable:  During the operation of the air conditioner, the water in the air is turned into condensed water and discharged out of the room, and the hot
阅读全文

Under the energy crisis, heat pump floor heating will become the main force of winter heating in European homes

图片
  As a result of the escalating conflict between Russia and Ukraine, energy supplies such as natural gas and oil are tight in Europe, and their commodity prices are pushing up. Previously, spot natural gas prices in Europe have been as high as $2,500 per 1,000 cubic meters, and previously German Deputy Chancellor and Minister of Economy and Climate Protection Robert Habeck has said that Germany plans to raise its carbon tax on carbon dioxide to 55 euros per ton in 2025 from the current 25 euros per ton. Clean energy status climbing fast amid energy crisis At present, European countries are entering winter, and the demand for heating is huge. The energy shortage and soaring energy prices have led to tens of millions of families in Europe having "no gas" and "no gas" in winter, making it difficult to meet their immediate heating needs. If we continue to rely on non-renewable energy sources such as natural gas for heating, every winter in the future will be a bitterly
阅读全文

Easier, stronger, faster! Smlg opens a new era of electrothermal actuators!

图片
  Electric heating actuator   is a commonplace old product in the HVAC industry, and is widely used in the field of floor heating and water circuit connection, air conditioning water circuit connection. Previously, it was more controlled by the room thermostat, and the temperature value was used as the switching amount, which contributed to the realization of indoor constant temperature and energy saving. The traditional manual electric heating actuator can work stably under most conventional working conditions to meet the design and use functions. However, as a normally closed power mechanism, once it encounters extraordinary circumstances, such as a sudden power failure, it will cause the actuator to be closed and cannot be opened. In the long summer, the normally closed  actuator  for heating is usually closed by power off, which is of course normal, but from the perspective of the manifold, the spring of the branch spool is squeezed to the limit for up to half a year, so when the h
阅读全文